Overview
This guide covers loading the files exported from PVX.AI into PVsyst’s 3D scene. The steps depend on which design file you exported:
- Classic file (.pvc), from Design (PVC): import the terrain CSV first, then the design, then rotate it 180 degrees.
- PVCollada 2.0 file (.pvc2), from Design (PVC 2.0): the file carries its own terrain. Import it as it is, with no rotation.
Prerequisites
The files exported from PVX.AI: Terrain (CSV) plus Design (PVC), or a single Design (PVC 2.0) file. For a .pvc2 file, a PVsyst version that can import PVCollada 2.0. The menu names below describe PVsyst’s own interface, which can differ slightly between PVsyst versions.
Step-by-Step Guide
1. Import the terrain (classic file only)
In PVsyst’s 3D scene, use the ground/terrain import and select the CSV exported with Terrain (CSV). The terrain points load as the ground.
2. Import the design file
Import the .pvc or .pvc2 file as a 3D scene object. When PVsyst asks whether to delete the current scene, choose not to, so the terrain you just loaded stays in place.
3. Align a classic file
For a .pvc file, set the X, Y and Z offsets to 0, then rotate the imported objects 180 degrees around the origin. The tables then land on the terrain. Do not rotate a .pvc2 file: it is already in place.
4. Check the result
In the 3D view, check that the tables sit on the terrain and that fixed and tracker tables came in as the right type. PVsyst recognises trackers as tracking objects and fixed tables as fixed.
5. Continue the simulation in PVsyst
Run PVsyst’s near-shading and simulation steps as usual. With a .pvc2 file, check the module and inverter data PVsyst read from the file before you simulate.
Tips & Recommendations
- If the tables land in the wrong place, first confirm which file format you imported. Rotating a .pvc2 file, or not rotating a .pvc file, is the most common cause.
- If the tables float above or sink into the ground, check that the terrain CSV and the design come from the same drawing and the same design state. Export both again after any change.
- The terrain CSV is written in the drawing’s units, while both PVCollada formats are in metres. In a feet drawing, check the terrain scale after import.
- For an energy yield report without leaving AutoCAD, use Export > Assessment (PDF) instead.
