Overview
Every earthworks run in PVX.AI keeps the ground you imported and the ground you designed side by side, so you can check what changed and by how much. Four tools answer different questions:
- Terrain layers: what does the site look like before and after? Toggle the two surfaces in 3D.
- Before/after table: how much cut and fill, and did the slopes come within target? Drawn automatically after each run.
- Generate Terrain Profile: how deep is the cut or fill along a particular line, such as a road or a row?
- Cubage Breakdown: what are the volumes inside one boundary, for example one PV Area or one construction phase?
Prerequisites
A drawing in which grading, Adapt Terrain to Pile, a collision fix or BESS pad grading has run.
Step-by-Step Guide
1. Know the two surfaces
PVX.AI keeps two terrain layers:
- PVXAI_Terrain_Initial: the surface as imported. It is the baseline and is turned off after a grading run.
- PVXAI_Terrain_Current: the working surface, including every earthworks change.
Where Adapt Terrain to Pile has run, the rack pad surface is also kept on PVXAI_Terrain_Current_TIN, which is off by default.
2. Compare them in 3D
Use AutoCAD’s 3D Orbit and switch the layers on and off: Initial only shows the original ground, Current only shows the designed ground. Turn on PVXAI_CutFill to see where earth was moved.
3. Read the before/after table
After each run PVX.AI draws a table on PVXAI_Terrain_Legend_CutFill with the slope distribution before and after and the cut and fill volumes. New runs stack their tables below the earlier ones.
4. Draw a terrain profile
Go to Civil sub-tab > Earthworks > Generate Terrain Profile and follow the prompts. The profile shows both surfaces, their elevation labels and the cut/fill hatching between them. It draws no racks or piles; for a section with racks use Generate Cross-Section under Collision Analysis on the Layout panel.
5. Measure one area with Cubage Breakdown
Go to Civil sub-tab > Earthworks > Cubage Breakdown and pick a closed boundary. PVX.AI compares the original and current terrain inside it and draws the cut/fill map and a comparison table for that area only.
Tips & Recommendations
- For a point-by-point list of original and finished levels, export Earthworks (CSV). See Earthworks Export and Clean-Copy Export.
- Spot elevations from Contours & Spot Elevations label the current surface at every terrain point, which is useful on plan sheets.
- Do not edit or delete PVXAI_Terrain_Initial. Reset Terrain and every volume calculation depend on it.
