Info Screen and Bill of Quantities (BoQ) Export

Overview

The Info Screen shows the key figures of the design in one window: installed power, module, rack and pile counts, pile lengths, GCR and cut and fill volumes. The same data exports as an itemized Bill of Quantities (BoQ) workbook in Excel. Every PV area in the drawing is counted, including BESS units and PCS skids placed with the BESS Designer.


Prerequisites

A design with racks placed. Pile, electrical and earthworks rows fill in as those parts of the design exist; a row whose data is not in the drawing yet is marked Data not yet collected.

Step-by-Step Guide

1. Open the Info Screen

Click BoQ on the Design Review panel. The same window opens from Export > BoQ (XLS) on the Export panel.

2. Review the project figures

The window lists the area, Total Power, # of Modules, # of Racks, pile count, minimum, maximum and total pile length, GCR, Cut Amount and Fill Amount, with a row per PV area and a Totals row.

3. Check the slope distribution

The Slope Distribution panel groups racks by the terrain slope under them. Switch between N-S and E-W to see each direction. Racks over the slope limit are counted separately so you can find them before you export.

4. Export the BoQ

Click Export BoQ and choose where to save the workbook.

5. Read the four sheets

Each sheet has the columns No., Description, Unit, Quantity and Notes:

  • Main Equipment: PV modules, mounting structures (fixed, East-West, tracker), piles and foundations grouped by length, and rack slope distribution (N-S and E-W).
  • Civil Works: site preparation, roads, earthworks cut and fill volumes, cable trenches, earthing, site enclosure and power-station civil works.
  • Electrical System: transformers, inverters, DC combiner boxes, DC and AC cabling, earthing cable, and BESS units and PCS skids when the design has them.
  • Miscellaneous: site auxiliary equipment, communication, and monitoring and control.

Tips & Recommendations

  • Export the BoQ again after every design change. The workbook is a snapshot of the drawing at the moment you export it.
  • The BoQ uses the drawing’s units: metres and cubic metres in a metric drawing, feet and cubic yards in a feet drawing.
  • For cable quantities per PV area, use Export > Cables (XLS), which writes one sheet per PV area.
  • For pile lengths ready for procurement, use Export > Piles (XLS).
  • Before you send the quantities out, run Health Check on the same panel to catch drawing problems that would make the counts wrong.

Related