Generating a Single Line Diagram (SLD)

Overview

PVX.AI draws an IEC 60617 single line diagram (SLD) straight from the electrical design in the drawing: transformers, inverters, DC boxes and strings, and battery storage when it is part of the design. The diagram goes onto its own paper-space layout tab, so the model space is not touched.


Prerequisites

A completed electrical design with transformers placed. If you moved devices by hand, run Adapt Devices first.

Step-by-Step Guide

1. Start the generator

Click Electrical sub-tab > Generate SLD. The Single Line Diagram dialog asks how to draw it.

2. Choose Aggregated or Full Detail

  • Aggregated collapses identical inverters into one row marked ×N. The diagram fits a printable sheet. Use it for issue drawings and permits.
  • Full Detail draws every inverter on its own row. The sheet becomes very large. Use it to check the data device by device.

3. Review the result

The diagram is drawn on the PVXAI_SLD layout tab. DC wiring is orange, AC wiring green and MV wiring red. A title band gives the plant rating in MW and the transformer, inverter and string counts. On a site with several PV areas, each transformer is captioned with its PV area.

4. Battery storage

When BESS units are placed in the design, the diagram also shows the BESS and PCS clusters with their MW and MWh totals.

5. Regenerate after changes

The SLD is a snapshot. After changing the plan, devices or strings, click Generate SLD again to redraw the tab.


Tips & Recommendations

  • If the number of strings the diagram would draw does not match the design, PVX.AI stops without touching an existing SLD tab. Run Health Check, fix the findings (orphan strings, devices not placed), then generate again.
  • Keep the SLD and the cable export from the same state of the design: regenerate both after any re-plan.

Related