Importing KML Files

Overview

Import KML/KMZ brings parcel boundaries drawn in Google Earth into the drawing and builds the terrain under them. It is the quickest way to start a project when you have no survey: the wizard fetches elevation data for the area, builds the 3D surface, georeferences the drawing and switches on AutoCAD’s live Bing Hybrid base map so you see the site over aerial imagery.

Use a KML import for early layouts and feasibility. When a drone survey, a contour plan or a point file is available, build the terrain from that instead: it is more accurate than global elevation data.


Prerequisites

A KML or KMZ file with closed polygons for the site. Full AutoCAD or Civil 3D with PVX.AI loaded. No coordinate system entry is needed: KML files carry geographic coordinates.

Step-by-Step Guide

1. Open the wizard

On the PVX.AI ribbon, go to the Terrain Import panel and click Import KML/KMZ. The wizard has three steps: File, Area and Terrain.

2. Choose the file

On the File step, click the drop zone and pick your KML or KMZ file, then click Next →. The polygons are imported into the drawing on the PVXAI_KML_Boundary layer. If the drawing already has KML polygons, you are asked Delete previous KML?: choose No to keep them when you are adding an adjacent area.

3. Select the area

On the Area step, click Select Area in Drawing and pick one or more boundary polylines. The terrain is built only inside the polygons you pick.

4. Check the terrain settings

Before you finish, open the Terrain Settings tab if you want directional slope maps or different slope ranges. These settings are saved with the project and apply to every terrain operation. See Directional Slope Maps.

5. Set the grid resolution and finish

On the Terrain step, set Grid resolution, the distance between neighbouring terrain points (3 to 25 m, default 10 m). Click Finish. PVX.AI fetches the elevation data, builds the surface, draws the slope legend and georeferences the drawing.


Tips & Recommendations

  • Which grid resolution: keep 10 m for a first look at a large site. Go down to 5 m on small or rolling sites where racks must follow the ground closely. A finer grid is heavier to draw and to grade, and it cannot add detail that the elevation source does not have.
  • Click Skip Terrain on the last step to bring in the boundaries only. You get 2D polygons, and rack tilt, cut/fill and shading are not available for that area.
  • The live base map needs you to be signed in to your Autodesk account. If you are signed out, the location is still set and the imagery appears once you sign in.
  • An imported KML polygon is not a PV Area yet. Convert it before you build a layout.
  • To cover more ground later, see Extending the Terrain Area.

Related