Importing Contour Lines

Overview

Import Contours builds the terrain from elevation data that is already in the drawing, typically a topographic survey delivered as DWG. Despite the name it reads more than contour polylines. Elevation is taken from:

  • polylines and splines (their elevation or vertex Z)
  • lines and arcs (end point Z)
  • points, 3D faces and meshes (vertex Z)
  • text and mtext (the elevation written in the label)
  • block inserts (insertion Z or a numeric attribute)

You choose which layers to read, so a survey drawing with title blocks and annotation can be imported without cleaning it first.


Prerequisites

A drawing with the survey linework, and a closed boundary polyline around the area to build. Know the survey’s coordinate system if you want the drawing georeferenced.

Step-by-Step Guide

1. Open the dialog

On the Terrain Import panel, click Import Contours. The Contour Line Processing dialog opens on its Import tab.

2. Select the boundary

Under Area, click Select Boundary and pick the closed polyline. The terrain is built inside it.

3. Set the grid resolution

Enter the Grid Resolution (0.5 to 25 m, default 10 m). Match it to the density of the survey: where contours are far apart in plan, a very fine grid only interpolates between them and makes the mesh heavier. 2 to 5 m suits most survey drawings.

4. Pick the layers

Under Layers, tick every layer that holds elevation data, such as major and minor contours and spot levels. Type in the search box to filter a long layer list. A ticked layer stays ticked while it is filtered out of view.

5. Set the coordinate system

Search the Coordinate System list by EPSG code or name and pick the survey’s system. If you do not know it, click No Coordinate System Information: the terrain is built in drawing coordinates, but tools that need a location, such as Soil Compaction and Erosion Controls, ask for one later.

6. Build

Click OK. PVX.AI builds the surface and draws the slope legend.


Tips & Recommendations

  • Leave out layers with numbers that are not elevations, such as grid labels, chainages or plot numbers. They are read as elevations and distort the surface.
  • Use the Terrain Settings tab to turn on directional slope maps before you build.
  • If the drawing already has terrain, the grid resolution is locked to the existing value so the surfaces join.
  • For point files (TXT or CSV) use Import TXT/CSV instead. See Importing Z-Points.

Related