Importing Z-Points

Overview

Z-points are individual surveyed elevations: a total station or GNSS export, or spot levels on a survey drawing. PVX.AI builds a terrain from them in two ways, depending on where the points are:

  • The points are in a file (TXT or CSV with X, Y, Z columns): use Import TXT/CSV. This is the cleaner route, because the file holds only the points.
  • The points are already in the drawing (AutoCAD points, blocks with an elevation, or elevation text): use Import Contours and tick the layers that hold them.

Prerequisites

A point file with one point per row, or a drawing with the points on their own layers. For a file, know the coordinate system the coordinates are in.

Step-by-Step Guide

1. Open Import TXT/CSV

On the Terrain Import panel, click Import TXT/CSV. The wizard has four steps: File, Mapping, CRS / Boundary and Terrain.

2. Choose the file

Pick the TXT or CSV file. Decimals must use a dot (12.34). Comma decimals are not supported. Empty lines and lines starting with # are skipped.

3. Map the columns

On the Mapping step, set the Delimiter (Auto, comma, semicolon, tab or whitespace) and tick First row is a header if it is. Check the Preview (first 4 rows), then assign X (Easting / Longitude), Y (Northing / Latitude) and Z (Elevation). PVX.AI tells you whether the values look like geographic degrees or a projected grid.

4. Pick the coordinate system and boundary

On the CRS / Boundary step, pick the source coordinate system. It is optional: without one the points are imported as they are, with no reprojection, and the project location is not set. Optionally import a KML/KMZ boundary or select one in the drawing; only points inside it are used.

5. Create the terrain

On the Terrain step, set Grid resolution (1 to 25 m) and click Create Terrain.

Points already in the drawing

Click Import Contours, select the boundary, and tick only the layers that hold the points (for example ground1 and ground2). Set the grid resolution and coordinate system and click OK. See Importing Contour Lines for the full dialog.


Tips & Recommendations

  • Pick a coordinate system whenever you know it. Without one, the drawing has no location, and Soil Compaction and Erosion Controls will ask for one.
  • Survey in US survey feet or international feet: the horizontal coordinates are converted to metres, but elevations are taken from the file as they are. Convert the elevations to metres before importing, or check the terrain levels right after the import.
  • If the coordinates are latitude and longitude, PVX.AI suggests EPSG:4326 and reprojects the points.
  • Point density sets the accuracy. Sparse points over rolling ground give a smoothed surface; add breakline points along ridges, ditches and banks.
  • A grid much finer than the point spacing adds no detail and makes the mesh heavier.

Related