Moving, Copying, and Adapting Racks

Overview

After a layout is built you can move racks by hand, copy racks into gaps, and have PVX.AI fit them to the terrain at their new position. Move Racks does the move and the fitting in one step, and checks that the new position is allowed.


Prerequisites

Racks placed with Build Layout or Import Layout, and terrain loaded.

Step-by-Step Guide

1. Start Move Racks

On the Layout panel, open the Tools dropdown and click Move Racks. It is also in the right-click menu when racks are selected.

2. Select and move

Select the racks with a window or crossing selection and press Enter. Drag them to the new position and click. Racks in a multi-row tracker group always move together.

3. Check the command line

PVX.AI recalculates elevation and tilt at the new position. A rack that would end up outside the PV area, inside an exclusion area, on a road or on top of another rack is not placed, and the command line says which rack and why, for example Rack R-12 cannot be placed: overlaps road.

4. Copy racks

To fill a gap with more racks, copy existing racks with the AutoCAD COPY command. Then run Move Racks again and select only the copies. PVX.AI turns them into real racks at the positions where you placed them, with new rack numbers, without asking you to drag them. A selection that mixes copies and original racks is refused.

5. Re-fit a whole PV area

To re-fit every rack in a PV area at once, for example after grading or after pasting many racks, click Adapt Objects on the Layout panel and pick the PV area.


Tips & Recommendations

  • Move Racks works for fixed, east-west and tracker racks.
  • Run Collision Analysis after manual edits to check reveals and clearance at the new positions.
  • If you move racks after stringing and cabling, check the electrical design afterwards and regenerate the cabling where needed.

Related