Overview
Rack Slope Analysis colours every placed rack by the terrain slope under it, from green at a minimum slope to red at a maximum. It shows at a glance which rows sit on ground near or beyond what the rack type allows, so you know where to grade, where to change the rack type, or where to leave the ground empty.
Prerequisites
Terrain in the drawing and racks already placed.
Step-by-Step Guide
1. Open the tool
On the Layout panel, open the Tools dropdown and click Rack Slope Analysis. It is also in the right-click menu.
2. Pick the direction
Under Direction:, choose North-South or East-West. For fixed racks the north-south slope usually matters most; for single-axis trackers the slope along the tracker axis does.
3. Set the band
Enter Min: and Max: in degrees. Racks at or below the minimum are green, racks at or above the maximum are red, and racks in between run through yellow.
4. Apply
Click Apply to colour the racks, or Clear to remove the colours. Click Close when done. The colours stay when the layout is rebuilt.
Tips & Recommendations
- Set Max: to the slope limit of your rack, so every red rack is a real exception.
- This tool works in degrees, while the Build Layout slope limits are in percent. As a guide, 10% is about 5.7° and 15% is about 8.5°.
- The Slope Distribution section of the Info Screen and the Rack Slope Distribution groups in the BoQ export give the same data as numbers.
