Import Layout (2D to 3D Conversion)

Overview

Import Layout converts a 2D table layout, drawn in PVX.AI or received from another CAD tool as blocks or closed polylines, into PVX.AI racks placed on your terrain. The converted racks behave like racks from Build Layout: they have piles, can be strung and wired, and appear in the BoQ and exports.


Prerequisites

The 2D layout in the drawing, terrain loaded, a PV area around the tables (create one with Convert PV Area if needed) and a rack type in the database that matches the table size.

Step-by-Step Guide

1. Open Import Layout

On the Layout panel, open the Import dropdown and click Import Layout.

2. Select the rack and PV areas

Click Select Rack and choose the rack type that matches the 2D tables. Click Select Boundaries and pick the PV areas that contain the tables.

3. Set slope checking

Switch on Use 3D Terrain (Slope Checking) and enter the N (%), S (%) and EW (%) limits. Tables on ground steeper than the limits are not converted. Enter 100 to convert every table regardless of slope.

4. Convert

Click Convert, then pick one table in the drawing. The pick is an example: picking a block converts every insert of that block, and picking a closed polyline converts every closed polyline on the same layer. Only tables inside the selected PV areas are converted.

5. Check the result

Each rack is centred on its 2D table and set on the terrain with its tilt and elevation. Rack numbers continue after the highest number already in the drawing, so a second conversion never reuses a name. Tables that fall on a manual road or inside its rack setback are skipped.


Tips & Recommendations

  • Run Collision Analysis after converting to check pile reveals and ground clearance across the converted layout.
  • Terrain-following tracker specs convert as articulated trackers, with their segments, joints and piles.
  • To bring in a full PVcase project (areas, racks, strings, devices), use Import PVcase Design in the same dropdown.

Related