Overview
Reset Terrain puts the working terrain back to the surface imported at the start of the project and discards every grading and terrain-correction edit. Use it when you want to try a different earthworks approach from the original ground, for example after comparing area grading with Adapt Terrain to Pile.
The reset gives you two choices, and the right one depends on whether you want to keep the design:
- Reset the terrain only: restores the ground and touches nothing else. Choose it to re-grade under an existing layout.
- Remove everything and reset: also deletes everything PVX.AI drew on the site. Choose it to start the design over on the original ground.
Prerequisites
A drawing whose terrain was imported with a PVX.AI importer. The import writes the baseline surface (PVXAI_Terrain_Initial) that the reset restores; a drawing whose terrain arrived some other way cannot be reset.
Step-by-Step Guide
1. Start the reset
Click Civil Analysis on the PVX.AI ribbon, then go to Civil sub-tab > Terrain > Reset Terrain.
2. Read the confirmation
The dialog states how many terrain faces will be replaced and lists what each choice removes. Every grading and terrain-correction edit is discarded in both cases, together with the cut/fill drawings, volume tables and rack pad surfaces that describe them.
3. Choose what happens to the design
- Reset the terrain only: racks keep their current heights and tilt, and the electrical design, roads and BESS stay as they are.
- Remove everything and reset: also deletes the racks with their labels, piles and section drawings, the whole electrical design with its cable schedule tables, BESS areas, units and exposure labels, roads, erosion-control measures, exclusions, trees and other shading objects. Only the PV Area boundaries and the imported KML boundary are kept. The single-line diagram layout (PVXAI_SLD) is not deleted.
Cancel is the default, so nothing happens if you close the dialog.
4. Re-seat the racks (terrain only)
If you kept the design, run Adapt Objects on each PV Area so the racks sit on the restored ground. Until you grade again, the slope legend and directional slope maps still describe the graded surface.
Tips & Recommendations
- Either choice is undone with one Ctrl+Z.
- Existing contours and spot elevations are redrawn for the restored terrain automatically.
- If you only want to see the original ground, you do not need a reset: turn on the PVXAI_Terrain_Initial layer instead.
