Creating Solar Modules and Importing PAN Files

Overview

Every rack in PVX.AI is built around one PV module. The module’s size sets the table dimensions, and its electrical values are used for stringing, cable sizing and the PVsyst export. PVX.AI ships a catalog of modules, and you can add your own Custom modules by importing a PVsyst .PAN file or by typing the datasheet values.


Prerequisites

PVX.AI installed and activated. For a new module, the manufacturer’s .PAN file (most manufacturers publish one next to the datasheet) or the datasheet itself.

Step-by-Step Guide

1. Open the module library

On the PVX.AI ribbon, go to Database > Products > PV Modules. The Search in Modules window lists every module you can use, with brand, module name, power and dimensions.

2. Check whether the module already exists

Type the brand or model into Search Brand / Model. Use the filter buttons to narrow the list:

  • Catalog: modules that ship with PVX.AI. They cannot be edited or deleted.
  • Custom: modules you created. Only these can be edited or deleted.
  • All: both lists together.

If the exact module is in the catalog, you do not need to create it. Select it when you design the rack.

3. Create a new module

Click New Module. The window has three groups: Identity (brand, module type, technology), Mechanical Characteristics (width, length and thickness in mm) and Electrical Characteristics (power, Voc, Isc, Vmpp, Impp, cells in series and parallel, and the temperature coefficients).

4. Import the .PAN file

Click Import .PAN File and pick the file. PVX.AI reads it and fills the form: dimensions, the electrical values at STC, the temperature coefficients and the module’s maximum system voltage, which is used when strings are sized. PVsyst stores some coefficients in different units (for example the Isc coefficient in mA/°C); PVX.AI converts them on import.

Without a .PAN file, type the values from the datasheet instead. Required fields are flagged if you try to save with them empty.

5. Review and save

Compare power, Voc, Isc and the dimensions against the datasheet, then click Save. The module is stored as a Custom module and is available in all your projects.

6. Use the module in a rack

Open Database > Products > Racks, create a fixed rack or tracker, and click Select Module in the settings window. The same picker with the same filters opens.


Tips & Recommendations

  • If you only ever use your own modules, turn on Hide catalog modules in Configurations > Settings. The picker then opens on the Custom filter and the catalog loads only when you ask for it.
  • To change a module, select it under Custom and click Edit. Catalog modules show a message instead, because they are read-only.
  • Give custom modules a clear brand and model name. That name is what you will search for later and what appears in reports.
  • When you import a .pvxrack file and no matching module exists, PVX.AI creates the module as a custom module and tells you how many it created.

Related